M-ZP mBox
Purpose
The M-ZP mBox is used to increase the number of zones and outputs in the system with the possibility of moving them away from the control panel at a distance of up to 1000 m.
This will be useful for connecting security detectors and automation in remote parts of the facility - another floor, another building, etc.
This way, you can reduce the number of wires and optimise the system topology.
This will be useful for connecting security detectors and automation in remote parts of the facility - another floor, another building, etc.
This way, you can reduce the number of wires and optimise the system topology.
Designed by professionals
8 basic signalling zones
M-Z module installation slot (+8 zones)
Universal slot for mounting the M-OUT2R relay module
Two power and two signal transistor outputs
Touch Memory interface
Tamper protection against opening the housing and detachment from the installation surface
8 basic signalling zones
M-Z module installation slot (+8 zones)
Universal slot for mounting the M-OUT2R relay module
Two power and two signal transistor outputs
Touch Memory interface
Tamper protection against opening the housing and detachment from the installation surface
Features
8 remote signalling zones
4 transistor outputs
Interface for connecting TM readers
M-Z and M-OUT2R modules can be installed
Built-in power supply
Protection against opening of the housing and detachment from the installation site
Connection via RS-485 system bus with a line length of up to 1000 m
Technical parameters
Compatibility
Orion NOVA L/L(i)
Orion NOVA M/M(i)
Connection to the SCP
RS-485 system bus with cryptographic exchange
Twisted pair cable category 5 or higher
Communication line length with up to 1000 m
Zones
8 wired zones in the base
8 wired zones with M-Z installation
Outputs.
Two transistor signal outputs
Two transistor power outputs
Power supply
Main power supply:
220 V, 50 Hz
220 V, 50 Hz
Backup power supply:
Lead-acid battery
for 7 or 9 Ah
Lead-acid battery
for 7 or 9 Ah
Maximum total output current:
1000 mA
1000 mA
Built-in 25 W power supply unit
Case
Overall dimensions:
280x280x85 mm
280x280x85 mm
Weight:
1.6 kg
1.6 kg
Degree of protection of the enclosure:
IP30
IP30
Operating temperature range:
-10°C to +40°C
-10°C to +40°C
