DETECTO MLT110
Certified fire alarm equipment
Temperature compensation, dusting, optocouple aging, automatic temperature compensation
The smoke chamber is not sensitive to dust
Built-in short circuit isolator
The possibility of remote indictor connecting
Low power consumption
Features
In DETECTO MNL110, the function of automatic compensation of dustiness, temperature and aging is implemented. Therefore, the sensitivity of the detector is always maintained at the set level, and the frequency of maintenance is reduced several times.
Intuitive and clear indication in DETECTO allows you to quickly and clearly distinguish the state of the detector: standby, registration process, fault, fire alarm.
The system also has a function of visual search of the detector – alternate flashing of green and red colors will help you find the needed device.
Creating a pair of detectors for indication
Usually, for detectors located behind the ceiling, a remote LED is used. In Tiras PRIME A, since update 1.3.1, the “pair indication” function has appeared – to the detector that is in an inaccessible place, you can assign another – “pair”, which will show its status and duplicate the indication of the “paired” device.
| The remote LED using in another systems | “Pair indication” in the Tiras PRIME A system |
The base is mounted with two screws or screws. After that, it is necessary to align the detector with the base, turn it clockwise until the detector settles in the base, then turn it in the same direction until the movement is restricted.
